How To Use Cruise Control Like A Pro: 5 Steps For Beginners

How To Use Cruise Control

Warning!, according to research, cruise control may prevent overspeeding, but slows the reaction time. Using cruise control may let you obey the speed limit but increases drowsiness while driving. That’s why it is necessary to not use cruise control while you are suffering from fatigue.

Cruise control is a system that automatically controls the speed of a vehicle. The system uses sensors to detect the speed of the vehicle and then adjusts the throttle to maintain a constant speed. Cruise control can be used in both manual and automatic transmission vehicles.

If you don’t know how to use cruise control, here is how to apply cruise control while driving. In this powerful article, you are going to learn how to use cruise control in a car with five steps, especially for beginners.

Related Post: Cruise Control Symbol On Dashboard

First Know The Cruise Control Buttons

Cruise Control
Cruise Control

The cruise control can be engaged and disengaged through the ON-OFF button. The SET button is used to set the desired speed to maintain.

The arrow up or + or ACCEL button is used to increase the speed of the car by 1 km/h or 1 mph (depending upon the manufacturers, and which units they use). Similarly, the down arrow or DECEL or COAST or “–” sign is used to decrease the speed of the car by 1 km/h or 1 mph without pressing the accelerator pedal.

A cancel button can temporarily discontinue the cruise control, and the RESUME button can resume the previously paused speed. Pressing the accelerator pedal will override the preset cruise speed. Depressing the brake or clutch can completely quit the cruise control.

Related Post: Does Cruise Control Save Gas

How To Use Cruise Control

Cruise control allows you to drive at a constant speed without holding your foot on the accelerator pedal. It locks the accelerator pedal with a specific speed and takes your foot off the accelerator pedal. Below are the five quickest steps especially for beginners on how to use cruise control in a car.

This is an Alert
The cruise control should be used on traffic-free roads or on highways that don’t have frequent bumps, turns, and stops.

This is an Alert
Before applying the techniques, follow the safety precautions. Be alert and wear a belt tightly

How To Use Cruise Control With 5 Quick Steps

1. Build Some Speed

Speed
Speed

To engage the cruise control, the car must have at least 40 km/h (25mph) speed.

This is an Alert
The minimum cruise control speed range varies according to manufacturers.

2. Turn The Cruise Control ON

Turn ON The Cruise Control
Turn ON The Cruise Control

Now, as you have built some speed, you can engage the cruise control by pressing the ON button on the steering wheel or windshield wiper stalk. The cruise control ON button does nothing except signal the car that a SET button is about to be pressed.

This is an Alert
Some cruise control system does not have an OFF button, it turns OFF automatically when the driver hits the brake pedal and turns ON when the driver taps on the SET button.

Related Post: How To Turn OFF Cruise Control

3. SET The Cruise Speed

SET The Speed
SET The Speed

As you have turned ON the cruise control, now you can set the cruise speed by pressing the SET button. In some cars, this will turn the cruise control indicator green in the instrument panel.

Congratulation!, you have successfully engaged the cruise control. After setting in the cruise control, you can take your foot off the accelerator pedal. At this point, the car should run at a SET speed.

4. Press The Up Arrow Or ACCEL Or + Sign To Accelerate

Accelerate The Car
Accelerate The Car

If you want to accelerate the car, tap on the Up Arrow or ACCEL or + sign to accelerate the car’s speed.

Related Post: Cruise Control Buttons & Their Functions

5. Press The Down Arrow Or DECEL Or – Sign To Decelerate

Decelerate The Car
Decelerate The Car

If you want to decelerate the car’s speed, tap on the Down arrow or DECEL or COAST or “–” sign to decelerate the car’s speed. Applying force on the brake pedal will completely turn OFF the cruise control.

This is an Alert
Some cars have a “CANCEL” button by which you can temporarily pause the cruise control system. You can reactivate the cruise control by pressing the “RESUME” (RES) button.

Related Post: Super Amazing Guide To What Is Cruise Control, Working, & Types! |

Frequently Asked Questions (FAQs)

Do you take your foot off the accelerator when using cruise control?

If you are using cruise control on a vehicle, it is important to take your foot off the accelerator so that the car can maintain a consistent speed. If you keep your foot on the accelerator, it will cause the car to speed up and then the cruise control will have to work harder to bring the car back down to the set speed. This can lead to decreased fuel efficiency and put more wear and tear on the car.

Can you brake with cruise control?

Can you break with cruise control? While it is technically possible to do so, it is not advisable. The cruise control maintains a set speed by regulating the engine’s throttle. When you need to brake with cruise control engaged, the car’s computer will automatically disengage the system. However, because cruise control relies on the engine to maintain speed, disengaging it mid-braking can cause sudden deceleration, which can be dangerous.


Sign Up

    About The Author

    Leave a Comment

    Your email address will not be published. Required fields are marked *

    Scroll to Top